Aluminum boats are found in a variety of sizes and shapes both painted and unpainted. typically, outside of routine maintenance, the only repair ever needed on an aluminum boat will be to stop a leak if one occurs.. A common problem affecting aluminum boats are leaks. collisions with underwater obstructions, beaching boats, and years of pounding waves are the likely causes of loose or missing rivets, widening of seams, and hairline cracks and tears.. Sometimes aluminum boats will develop small leaks and need repair. the hts-2000 is a no-flux brazing rod and all that is needed besides the brazing rod is a heat source (propane or mapp gas), a turbo tip, or oxy-acetylene..
This seals it for good and will not leak or come off. unless you have a welder for aluminum, this is a fantastic fix. you have to clean away the paint with a wire wheel or sandpaper the area first. you then paint over the bare aluminum with self etching spray primer from napa auto and then paint to match your boat color. does a professional job.. An aluminum boat leak is repaired with a no-flux brazing rod, such as the hts-2000, with fiberglass or with epoxy. the brazing tool is used with a heat source such as mapp gas or propane, oxy-acetylene or a turbo tip, allowing it to heat metal together to seal leaks in the aluminum boat's body.. We have a video demonstrating aluminum boat repair: fixing leaking rivets in an aluminum boat. we wanted to experiment with using g/flex to fix leaking aluminum boats. i was quite surprised to find that every aluminum boat owner i talked to said they had some sort of leak..
0 comments:
Post a Comment